Aqueous film-forming foam fire extinguishing agent 3% AFFF、-9℃

Product Name:Aqueous Film Forming Foam Fire Extinguishing Agent 3% AFFF, -9℃
Specification model: 3%AFFF
1. Basic functions:
Brief description: 3% AFFF, -9 ℃ foam fire extinguishing agent is an environmentally friendly, high quality water film-forming fire extinguishing agent, which can extinguish hydrocarbon fuel fires after mixing 3   volumes with 97   volumes of fresh water, suitable for Works with most proportioning mixers and foam injection units. Water film-forming fire extinguishing agent can form a water film on the fuel surface to isolate the water from the foam layer during the fire extinguishing process, and has excellent fluidity to quickly extinguish the fire by overwhelming the fire. At the same time, it has the advantages of long-term sealing performance and anti-flame back burn-back. Because it contains fluorocarbon surfactant, the water produced by aqueous film-forming fire extinguishing agent can reduce the surface tension of the foam solution, which is related to the fuel with high surface tension. Such as diesel and aviation gasoline, the effect is better than lower surface tension fuels such as hexane and gasoline.

Second, Features

1. The fire extinguishing speed is fast, the fire resistance is energy consumption, and the fire extinguishing level has been tested as IA level by the "National Fixed Fire Extinguishing System and Refractory Component Quality Dudu Testing Center".

2. Low energy consumption AFFF, requiring minimal stirring energy.

3. With excellent fluidity, it can quickly overwhelm the flame to extinguish oil fires.

4. Standard foam proportioning mixers and other foaming devices can be used.

5. Can be used with compatible dry powder.

6. Storage time is 8 years.

Third, typical physical and chemical properties
Appearance ——————— light amber
Specific gravity  (20 ℃), g/cm 3 ——————— 1.01-1.02
PH  value (20 ℃) ​​——————— 6-9.5
Freeze and thaw resistance ——————— no visible delamination and heterogeneity
Liquidity ——————— flow rate greater than standard reference fluid
Surface tension (20 ℃), mN/m —————— the deviation from the characteristic value is not more than 10%
Diffusion coefficient ——————— positive value
Foaming factor —— —————— deviation from eigenvalue at is not more than 1.0  or not more than eigenvalue
20%,
25% Elution time, min  ———————— the deviation from the characteristic value is not more than 20%
Fire extinguishing time, min ———————— forced ≤3, slow ≤5
Anti-burn time, min ———————— slow application ≥ 10
Freezing point, °C ———————— within eigenvalue - 4º
Use temperature, °C ———————— freezing point+5  ～40

Fourth, the scope of application
Aqueous film-forming foam fire extinguishing agent AFFF 3% is used in fixed fire extinguishing system or mobile fire extinguishing system at a mixing ratio of 3%, suitable for extinguishing hydrocarbon fires, such as: crude oil, gasoline, fuel oil and other fires, but for polar Solvents or water-soluble fuels such as alcohols, ketones, esters, ethers and other flammable fires are not suitable.